Some Interesting Facts About Clad Metals That You Need to Know
To attain the best results of the metals that you will be using for whatever purpose you have in mind, two distinct alloys or metals must be bonded into one and the result is what you call the clad metals. When it comes to clad metals, they come in various forms ranging from the plate ones to the wire, rod, tube, and sheet forms. Alloys and metals that can be clad are those that are typically used for engineering purposes. Cladding is the best process to use to get specific composite material characteristics that you can never get in just one material.
Clad metals can be easily bonded with the use of a wide range of processes from heavy chemical deposition, diffusion bonding, heavy electroplating, casting, welding, and co-rolling. In the jewelry industry, it is there that you can see the early beginnings of clad metals with its use in jewelry starting with combining the strength characteristics of base metals and the aesthetic appeal of precious metals.
Two basic classifications can be drawn out of clad metals; you have the overlay clads and the inlay clads.
In terms of sophistication in their application, you can find them among inlay clads. An inlay will first be used and then the maker of material will be mixing together cheaper materials such as brass, stainless steel, and copper with the more expensive ones such as platinum, palladium, silver, and gold to make the best results. Such combination assists putting together the properties of precious metals with how you want them as well as the other properties of the other metal to their contribution in heat sinking, welding, and spring.
There are a lot of benefits to using inlay cladding than selective plating. Inlay cladding is capable of using any kind of wrought alloy. This results in getting a more consistent composition out of your clad metals and using different kinds of alloys that cannot ordinarily be plated. By being great at selecting your materials, there is no doubt that you can have a well-accomplished surface that is more wear resistant, more dense, and harder than typical plated surfaces.
The process of overlay cladding, on the other hand, is more of putting various metal layers in one. The use of filler materials or adhesives is not done with this particular method of bonding metals or alloys. To bond them together, heat is used instead or very extreme pressure. With this process, you can reach up to seven layers of the new metal clad as well as three layers or two layers called as double clad or single clad, respectively. There are several industries that can take advantage of overlay clads that are very much capable of being custom-made. Make sure to check this homepage to get more facts about clad metals.